Adding an Additional Gateway

Adding an Additional Gateway

Adding an additional Gateway

Description :        The following procedure guides you through adding and activating an additional Gateway to your Smart Home Account.


  1. Sign into your existing Smart Home Account.


  1. Select ‘Equipment’ from the Menu, followed by ‘Gateways’ (as shown below).



  1. Your Current Gateways will be shown.  Now click on ‘Add a Gateway’.



  1. An instructional procedure message is displayed on the screen guiding you through the next steps.



  1. Press the button on the top of the Gateway, your UG600 will begin to flash Green.


A picture containing dishwareDescription automatically generated

  1. Now click on the blue ‘Search for Gateway’ button on your Smart Home Screen.



  1. When your Gateway is found, its Serial Number will automatically be populated onto the screen. You now have two minutes to select the options on the screen and complete the address and name for your Gateway. You then need to press the blue ‘Activate my Gateway’ button.



Note : If the screen times out before you have finished entering the information, simply press the button on the top of the Gateway once, the LED should return to solid blue. Then click on the ‘Search for Gateway’ button again and re-enter the details completing the process by clicking the ‘Activate my Gateway’ button.



  1. You have now successfully installed your UG600 Gateway. 


    

  1. To go to your Smart Home Dashboard, press the Salus Logo.




                                               ___________________                                                                                   

    • Related Articles

    • Activating the Gateway

      Activating the Gateway Introduction :   The Universal Gateway is the key product for the SALUS Smart Home system. This will offer you the possibility to wirelessly control all the connected equipment just by using your smartphone or your computer. ...
    • Installation of the UG600 Gateway

      Installation of the UG600                                      Introduction :   The Universal Gateway is the key product for the SALUS Smart Home system. This will offer you the possibility to wirelessly control all the connected equipment just by ...
    • UG600 - Videos and Manuals

      The SALUS Smart Home gateway is what connects your SALUS iT600 Smart Home devices together and when connected to any WIFI router allows control via Smartphone, Tablet or PC, using the SALUS Smart Home app.
    • RE10RF - Smart Home ZigBee Repeater

      If your iT600 system has more than 32 battery-powered devices, alongside the CO10RF ZigBee coordinator/G30 Gateway or UGE600 Universal Gateway you must add an RE10RF ZigBee repeater. You must also add an RE10RF repeater if the battery-powered devices ...
    • SB600 - Smart Button

      The Smart Button is used to trigger the “One touch” and “My Status” rules that you have created for your SALUS Smart Home system. Normally “One touch” and “My Status” rules are triggered via the SALUS Smart Home app, however the Smart Button provides ...