CO10RF - FAQs

CO10RF - FAQs

Question: Where do I put the CO10RF when installing?
Answer: The CO10RF by default is plugged into the KL08RF wiring centre. The CO10RF can be plugged into any other USB 2.0 port, with the condition that this USB port provides a constant power and is in range of the connected devices. The CO10RF is the hub that saves all the devices connection information meaning if the CO10RF loses power all your units established connections will disconnect while the CO10RF is depowered.

    • Related Articles

    • CO10RF ZigBee Wireless Co-Ordinator

      All iT600 ZigBee wireless systems need a coordinator to control and coordinate the ZigBee network. The CO10RF coordinator can make any iT600 system smartphone ready by connecting the coordinator to the G30 smartphone gateway (sold separately).

    • CO10RF - Firmware Update Software

       CO10RF : Firmware Update  (3.1.1) . To update the Firmware of your ZigBee Co-Ordinator from the KL08RF Wiring Centres to enable it to run with the latest thermostats, please simply click on one of the links below to download the Firmware installer. ...

    • HOW TO UPDATE THE CO10 COORDINATOR

      HOW TO UPDATE THE CO10 COORDINATOR On your PC If you follow the link below Get Support – Salus (saluscontrols.com) Click on COORDINATOR UPDATE Click on PC DOWNLOAD Run the downloaded file Click on NEXT Click on INSTALL Wait for it to finish Click on ...

    • CO10RF - Technical Information

       CO10RF : Technical Information Page  (3.1.1) . All iT600 ZigBee wireless systems need a coordinator to control and coordinate the ZigBee network. The CO10RF coordinator can make any iT600 system smartphone ready by connecting the coordinator to the ...