EXAMPLE OF HEAT PUMP WIRING FOR COOLING/HEATING WITH HP IN CONTROL

• Related Articles

• Underfloor heating/cooling changeover with a heat pump using SR600 relays

  Salus Smart Home controls can be used with underfloor systems that have a compatible heat pump capable of producing heating or cooling modes. Important: You must check that your heat pump can be controlled with a 230V switched live on the heat and ...

• FC600 - Wiring Diagram

  FC600 : Wiring Diagram ( ) .

• RX10RF - Wiring Diagram

  RX10RF : Wiring Diagram . Connection to Boiler Connection to Control Valve / Pump __________________________

• Adding hot water control with an SR600 relay (UG600 system)

  To add hot water control to a system that already uses a KL08RF wiring centre, a UG600 gateway and SQ610RF thermostats, a common approach is to use an SR600 smart relay wired to your hot water motorised zone valve — wired so that when the relay is ...

• TS600 - Wiring Diagram

  TS600 : Wiring Diagram (1.1.1) . The TS600 Requires no wiring, simply install 2xAA Alkaline Batteries. __________________________