Firmware Update for SQ610 and SQ610RF Thermostat
To ensure proper operation and access to the latest features, it is recommended to regularly check for firmware updates for your SALUS devices.
How to check and update the firmware:
- Log in to your SALUS Premium lite account using the mobile app or a web browser.
- Click the gear icon (⛭) in the top right corner of the main screen (on your account tile).
- Select “Scan My Home”.
- A list of devices connected to your Internet gateway (UGE600/UG800) will appear.
- If a cloud icon appears next to a device, it means a firmware update is available.
- Click the cloud icon to start the update process.
- Wait for the update to complete – do not disconnect the device or the gateway during the process.
Note:
- If no cloud icon is visible, your device is already up to date.
- Make sure your UGE600/UG800 gateway has a stable Internet connection, otherwise the update cannot proceed.
- Updates are done remotely – no physical access to the thermostat is required.
Related Articles
How to exit Standby mode in the app and on the thermostat
If Standby mode is enabled and you want to deactivate it, there are two ways to do it: 1. On the thermostat: Press and hold the power (“OK”) button for about 5 seconds. This toggles Standby mode on or off (works both ways). 2. In the SALUS Premium ...
Activating Cooling Mode
The ability to activate cooling depends on how your system is configured and which devices are connected. Thermostat works independently (not connected to KL08RF) Using the Salus Premium Lite app Log into the Salus Premium Lite app. Tap the tile for ...
Incorrect Temperature Displayed (Too High or Too Low)
If the thermostat seems to show a temperature that doesn’t match the actual room temperature, you can adjust the displayed value using the temperature offset function. The adjustment range is from -3.5°C to +3.5°C. How to adjust the displayed ...