How to Add the Salus TRV10RFM Head to a ZigBee Network – Step-by-Step Guide
How to Add the Salus TRV10RFM Head to a ZigBee Network – Step-by-Step Guide
The TRV10RFM is an intelligent, wireless thermostatic head operating on the ZigBee protocol. It can be used within the Salus Smart Home system via the CO10RF coordinator or the UGE600 internet gateway. Below is a complete guide for adding the device to the network and understanding the meaning of LED signals.
Preparation for Installation
Choose your ZigBee network coordinator:
- UGE600 – for online use with internet access
- CO10RF – for offline, local operation without internet
Do not use the CO10RF coordinator together with the UGE600 gateway – these devices are not compatible.
Mount the head on the valve:
- Supports valves with M30x1.5 or M28x1.5 threads (with adapter)
- For Danfoss RA valves – use the included RA adapter
Insert 2 AA batteries and close the battery cover.
Press any button to start the valve adaptation process (takes up to 5 minutes)
Pairing the Head with a ZigBee Network Step-by-step:
- Press and hold the pairing button (antenna symbol) for 10 seconds.
- The LED will start flashing red – the device is now in pairing mode.
- Add the head via the Salus Smart Home app or pair it with a thermostat (e.g., SQ610RF).
- Once pairing is successful, the LED will flash orange.
- The device is now ready to operate.
LED Signal – What the Colors Mean
Exiting Manual Mode
To return to automatic mode, press the pairing button once. Confirmation: the LED will blink red once.
Summary
Adding the TRV10RFM head to a Salus ZigBee network is quick and straightforward. Follow the pairing instructions and observe the LED signals to check device status. The head is compatible with Salus iT600 series thermostats and offers advanced features such as open window detection, frost protection, and anti-limescale functions – ensuring both comfort and safety.
Related Articles
Installing and Starting the TRV10RFM Head – Installer Guide - The LED light shows the current state of the TRV10RFM head.
1. General Description The TRV10RFM is a modern, wireless head that works with ZigBee 2.4 GHz. You can use it with the UGE600 internet gateway (online) or the CO10RF coordinator (offline). It works with iT600RF thermostats like SQ610RF, VS10WRF, ...