How to exit Standby mode in the app and on the thermostat

How to exit Standby mode in the app and on the thermostat

If Standby mode is enabled and you want to deactivate it, there are two ways to do it:


1. On the thermostat:
  1. Press and hold the power (“OK”) button for about 5 seconds.
  2. This toggles Standby mode on or off (works both ways).

2. In the SALUS Premium Lite app:
  1. From the main screen, select the tile of the device.
  2. On the right side, you’ll see the current operating mode: Standby, Manual, or Schedule.
  3. Tap and choose the desired mode to exit Standby.
  4. Switching in and out of Standby works the same way.
​
​
​
​
​
​
​

    • Related Articles

    • Activating Cooling Mode

      The ability to activate cooling depends on how your system is configured and which devices are connected. Thermostat works independently (not connected to KL08RF) Using the Salus Premium Lite app Log into the Salus Premium Lite app. Tap the tile for ...

    • Restart and Reset of the SALUS SQ610RF Quantum Thermostat

      The SALUS SQ610RF Quantum is a modern wireless temperature controller based on ZigBee technology, compatible with the SALUS iT600 system. If you need to restart or restore factory settings, there are several reset options available – both directly ...

    • Firmware Update for SQ610 and SQ610RF Thermostat

      To ensure proper operation and access to the latest features, it is recommended to regularly check for firmware updates for your SALUS devices. How to check and update the firmware: Log in to your SALUS Premium lite account using the mobile app or a ...

    • Frozen Display – What to Do When the Thermostat Doesn’t Respond

      If the screen is frozen and the device is not responding to touch or button presses, try one of the reset options below. Both methods restart the device without erasing your settings or paired devices. 1. Soft Reset Purpose: to quickly restart the ...

    • Incorrect Temperature Displayed (Too High or Too Low)

      If the thermostat seems to show a temperature that doesn’t match the actual room temperature, you can adjust the displayed value using the temperature offset function. The adjustment range is from -3.5°C to +3.5°C. How to adjust the displayed ...