Installation of the UG600 Gateway

Installation of the UG600 Gateway

Installation of the UG600

                                    

Introduction :   The Universal Gateway is the key product for the SALUS Smart Home system. This will offer you the possibility to wirelessly control all the connected equipment just by using your smartphone or your computer. You can connect up to 240 devices to one gateway.


Product Compliance :  This product complies with the essential requirements and other relevant provisions of Directives 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.saluslegal.com.


Safety Information :  Use in accordance with the regulations. Indoor use only. Keep your device completely dry. Disconnect your device before cleaning it with a dry cloth.






This product must be used with the SALUS Smart Home App.



Installation Procedure :
  1. First connect your UG600 Gateway to a power source and to your Internet Router / Broadband Hub using the cables provided.

              


              

The LED on your Gateway will go through a sequence of colour changes. If everything is connected correctly and you have an Internet connection your Gateway should finally turn blue.

If your Gateway remains Green, it means you do not have an Internet Connection.


  1. Now download and install the Salus Smart Home App.


  1. Press ‘Sign Up’ on the App and follow the on-screen instructions to create a Smart Home Account. Once you have confirmed the account, press ‘Sign In’ and log in with your credentials.

                   
  1. When you sign in you will be asked to Activate your Gateway. Simply do this by clicking on the Orange ‘Activate Gateway’ button.

                


  1. Press the button on the top of the Gateway, your UG600 will begin to flash Green. 

                                A picture containing dishwareDescription automatically generated   


  1. Now click on the blue ‘Search for Gateway’ button. 

     Graphical user interface, text, applicationDescription automatically generated

  1. When your Gateway is found, its Serial Number will automatically be populated onto the screen. You now have two minutes to select the options on the screen and complete the address and name for your Gateway. You then need to press the blue ‘Activate my Gateway’ button.

          


Note : If the screen times out before you have finished entering the information, simply press the button on the top of the Gateway once, the LED should return to solid blue. Then click on the ‘Search for Gateway’ button again and re-enter the details completing the process by clicking the ‘Activate my Gateway’ button.
  1. You have now successfully installed your UG600 Gateway. 

 
  1. To go to your Smart Home Dashboard, press the Salus Logo.


                                                     ________________________

    • Related Articles

    • UG600 - Videos and Manuals

      The SALUS Smart Home gateway is what connects your SALUS iT600 Smart Home devices together and when connected to any WIFI router allows control via Smartphone, Tablet or PC, using the SALUS Smart Home app.

    • Adding an Additional Gateway

      Adding an additional Gateway Description : The following procedure guides you through adding and activating an additional Gateway to your Smart Home Account. Sign into your existing Smart Home Account. Select ‘Equipment’ from the Menu, followed by ...

    • Activating the Gateway

      Activating the Gateway Introduction :   The Universal Gateway is the key product for the SALUS Smart Home system. This will offer you the possibility to wirelessly control all the connected equipment just by using your smartphone or your computer. ...

    • Connecting your UG600 to WiFi

      Connecting your UG600 to your WiFi. Description :   It is possible to connect your Smart Home System Gateway to the internet via WiFi instead of a hard wired RJ45 Ethernet Cable. To do this you will need to connect your gateway via the Ethernet Cable ...

    • RE10RF - Smart Home ZigBee Repeater

      If your iT600 system has more than 32 battery-powered devices, alongside the CO10RF ZigBee coordinator/G30 Gateway or UGE600 Universal Gateway you must add an RE10RF ZigBee repeater. You must also add an RE10RF repeater if the battery-powered devices ...