SALUS Smart Home System — Voice Assistant Compatibility

SALUS Smart Home System — Voice Assistant Compatibility

Integration of SALUS devices with Amazon Alexa and Google Home

The SALUS Premium Lite home automation system supports integration with the two most popular voice assistants: Amazon Alexa and Google Home (AoG). With this functionality, you can control compatible SALUS devices using simple voice commands, such as:

“Alexa, set living room temperature to 22 degrees.”
​
List of Compatible Devices

The integration currently supports the following SALUS device models:

  • HTRP_RF_50_

  • HTR_RF_20_

  • it600ThermHW_AC

  • it600ThermHW

  • it600ThermHWNH

  • it600ThermHWNH_AC

  • TS600

  • HTRS_RF_30_

  • SQ610RFNH1

  • SQ610RFWB

  • SQ610RF

  • SQ610NH_WB_

  • SQ610NH

  • SQ610RF_WB_

  • SQ610RFNH_WB_

  • SQ610RFNH

  • SQ610_WB_

  • SQ610

  • PS600

  • EL600T

  • C900T

  • TRV3RF

  • IT700TX

  • AWRT10RF

  • ST898ZB

  • ST899ZB

  • ST880ZB

  • ST880ZBPB

  • ST898ZBR

  • FC600NH

  • FC600

  • SC812ZB

  • SC824ZB

  • SR600

  • ST925WF

  • ST921WF

  • ST920WF

  • IT800TX

  • SX885ZB

  • SPE600

  • SP600

  • WQ610RF

​

How Does Integration Work?

  1. Connect to the SALUS Smart Home Cloud
    SALUS devices must be added to the     SALUS Smart Home app via the UGE600 or UG800 internet gateway.

  2. Integration with Google Home or Alexa
    In the Alexa or Google Home app, add the     "SALUS Smart Home" service:

    • In Alexa, activate the SALUS Smart Home Skill

    • In Google Home, add SALUS Smart Home from the available service list

  3. Voice Control
    Once the integration is complete, you can use voice commands such as:

    • “Alexa, increase temperature in bedroom”

    • “Hey Google, what’s the temperature in the kitchen?”

​
Technical Notes & Limitations

  • Integration is only available within the SALUS EU Smart Home system — using the UGE600 or UG800 gateway and the SALUS Smart Home app.

  • Voice control is available only for supported models listed above.

  • The UGE600 / UG800 gateway must have an active Internet connection (via Ethernet or Wi-Fi).

Not all SALUS products available globally are supported — only the models listed above.

    • Related Articles

    • Salus Smart Home

      Salus Smart Home System. Salus Domestic Salus Commercial

    • SALUS Smart Home Ecosystem: A Compatibility Guide

      SALUS Smart Home Ecosystem: A Compatibility Guide This article provides a comprehensive guide to the compatibility of various devices within the SALUS Smart Home ecosystem, focusing on both online and offline modes. Understanding these ...

    • SB600 - Smart Button

      The Smart Button is used to trigger the “One touch” and “My Status” rules that you have created for your SALUS Smart Home system. Normally “One touch” and “My Status” rules are triggered via the SALUS Smart Home app, however the Smart Button provides ...

    • CSB600 - Covered Smart Button

      The Protective Smart Button can be used during a panic situation in order to trigger the “One touch” and “My Status” rules that you have created for your Salus Smart Home system . Normally “One touch” and “My Status rules are triggered via the Salus ...

    • PS600 - Smart Pipe Sensor

               The PS600 temperature sensor measures and reports the measured temperature periodically. The measured temperatures can be used in a variety of ways depending on the system configuration: by association with cooling / heating systems, ...