IT500 - CHANGE FROM OFF TO AUTO MODE

IT500 - CHANGE FROM OFF TO AUTO MODE

CHANGE FROM OFF TO AUTO MODE
1. Light the screen
2. Press and hold the COG wheel and the TICK together for about 3 seconds
3. the HOUSE will be shown at the bottom left
4. OFF should be displayed at the bottom right
5. press the UP arrow
6. nothing displayed in the bottom right corner
7. press the UP arrow
8. AUTO displayed in the bottom right
9. press TICK
10. it should have gone back to the normal screen
11. now you should be able to operate your heating with the UP and DOWN arrows and press TICK to accept


    • Related Articles

    • iT500 - Operating Keys & Buttons

      iT500 : Operating Keys and Buttons (1.9.1) . Description : Tick / Confirm : This is used for selecting options. Return / Backup : A short press returns you to the previous screen. In Program Mode a long press returns you to the home screen without ...

    • iT500 - Heating - Cooling Mode

       iT500 : Heating – Cooling Mode   (5.7.0) .                     Keys / Buttons needed :       Cog/Settings       Tick/Confirm     Arrows           Description : The iT500 can work in Heating or Cooling Mode whichever is appropriate for the climate in ...

    • iT500 - Failsafe Mode

       iT500 : Failsafe Mode  (5.11.0) .            Keys / Buttons needed: Cog/Settings   Tick/Confirm    Return/Backup  Description :                         When the iT500 Receiver enters Failsafe Mode the top light on the      receiver will turn orange ...

    • iT500 - Manual Mode on the Thermostat

      iT500 : Manual Mode on the Thermostat (5.6.1) . Keys / Buttons needed : Cog/Settings Tick/Confirm Arrows Description : In Manual Mode your thermostat will not run any program schedules but allow you to set your desired room temperature manually. To ...

    • iT500 - Heating never comes on - Operating Modes on the Thermostat

      iT500 : Heating does not come on - Operating Modes (7.2.3) . If your heating does not come on at all, the first thing to check is that the iT500 is in Auto Mode. ‘AUTO’ should be visible in the bottom right of the thermostats display. If Auto is not ...