IT500- Device Code Location & battery installation

IT500- Device Code Location & battery installation

 iT500 : STA Device Code  & battery Installation (7.2.5) . 

The following document shows you the location of the Thermostats Device Code or ‘STA’ Number and how to correctly fit the batteries.



  1. Remove the battery cover from the base of the iT500 thermostat. 



  1. Take a note of the full device code. This will be needed to register your device and may be useful should you require any Technical Support.


  1. With the thermostat facing down, insert one new Alkaline AA Battery into the right hand side. 



  1. Insert the second battery into the left hand side. 



  1. Ensure the batteries are inserted with the correct polarity and are fitted securely in the unit. 



  1. Replace the battery cover. 


Note: The device code (STA number) is printed on the thermostat only. Replacement codes are not available, so please make a note of it before fitting the batteries and cover.



                                               ___________________________

    • Related Articles

    • IT500- Inserting Batteries & Device Code

       iT500 : Inserting the Batteries & STA Device Code  (1.5.1) .  Remove the battery cover from the base of the iT500 thermostat.  Take a note of the full device code. This will be needed to register your device and may be useful should you require any ...

    • How do I register my device on the App ?

       iT500 : Registering on the App (7.2.10) .  Description : The iT500 thermostat can be controlled from the App on your mobile phone, tablet or via the Website on your PC.  In this document we will look at the procedure to register a new device via ...

    • iT500 – I can't connect the device to my account

      Q: iT500 – I can't connect the device to my account? The iT500 has a unique device code, located on a label inside the battery compartment. It is this full code that must be linked with your iT500 Plus app account. Once the registration is completed ...

    • iT500 - Device is already connected.

      iT500 : Device is already Registered / Associated / Connected (6.4.3) . If when you are trying to register your device to an account you have just created, you get a message stating the “Device is already Registered / Associated / Connected to ...

    • IT500 - The app says my device is offline.

      iT500 : App says my iT500 is ‘offline’  (7.2.8) .  Description :  If you are experiencing problems with controlling your thermostat from the App on your mobile device or your App displays the Manage Devices screen when you log in then this document ...