DISABLING HOT WATER
1 - On the Thermostat
2 - Press the Power
Button to light the screen
3 - Press
and Hold the COG WHEEL Button and the UP arrow at the same time
4 - After 3 seconds the screen should change
To
show 2 HOUSE symbols and a TAP flashing
5 - Press the TICK key
6 - your current setting will be displayed
7 – if HOUSE 1 and TAP are displayed
8 – Press the UP arrow
9 – House 1 is displayed
10 - Press the TICK key until you get back to the
normal screen
14 – This may be about 7 presses
15 – HOUSE1 should be displayed. Indicating that
you have 1 Central Heating zone
hopefully
it should all be working now