iT500 - Frost Mode

iT500 - Frost Mode


 iT500 : Frost Mode  (5.3.0) . 


Description :             Frost Protection Mode is activated when your thermostat is switched off. It ensures that the temperature of your home does not fall below a  certain point to prevent your pipes from freezing.



Frost Temperature:   The Frost Protection Temperature is pre-set to 5’C but can be set to a   value between 5’C and 9’C.


                   1.                                                       2.                                                   3.

                         


1. Press the Menu Icon in the top right-hand corner of the App.

2. Select Frost Protection from the Menu.

3. Use the Slider Dot to Adjust the Frost Protection Temperature.

4. Once adjusted to the desired Temperature, Press Save. 


Activating Frost Mode :       Frost mode is activated when the thermostat is switched off. This can be performed on the App or the iT500 Thermostat.



         On the App.                                                                          On the iT500.





      Press and hold :       and     for 3 seconds.


      


       

        Use       and       to select ‘OFF’  




                                                     ___________________________
    • Related Articles

    • iT500 - Heating - Cooling Mode

       iT500 : Heating – Cooling Mode   (5.7.0) .                     Keys / Buttons needed :       Cog/Settings       Tick/Confirm     Arrows           Description : The iT500 can work in Heating or Cooling Mode whichever is appropriate for the climate in ...
    • iT500 - Holiday Mode

      iT500 : Holiday Mode (5.4.0) . Description : Holiday Mode switches your heating or cooling off for a defined length of time. Frost Protection will be activated in heating holiday mode. Note: Holiday Mode can only be activated from the Website or ...
    • iT500 - Failsafe Mode

       iT500 : Failsafe Mode  (5.11.0) .            Keys / Buttons needed: Cog/Settings   Tick/Confirm    Return/Backup  Description :                         When the iT500 Receiver enters Failsafe Mode the top light on the      receiver will turn orange ...
    • iT500 - Manual Mode on the App

       iT500 : Manual Mode on the App  (5.6.2) .  Description : In Manual Mode your thermostat will not run any program schedules but allow you to set your desired room temperature manually. Activating Manual Mode :                    1.                    ...
    • iT500 - Manual Mode on the Thermostat

      iT500 : Manual Mode on the Thermostat (5.6.1) . Keys / Buttons needed : Cog/Settings Tick/Confirm Arrows Description : In Manual Mode your thermostat will not run any program schedules but allow you to set your desired room temperature manually. To ...