iT500 - Hot Water Operating Modes on the Thermostat

iT500 - Hot Water Operating Modes on the Thermostat

 iT500 : Hot Water Operating Modes - Thermostat (3.2.1) . 


         



Keys / Buttons needed :      Cog/Settings         Tick/Confirm          Arrows          



Description : The Hot Water function has five Operating Modes : Auto, On, Once, Off and Boost.



Procedure : 

  1. Press the Cog key    to toggle to the hot water zone.


  1. Press the Cog key     and the Tick key   together to enter Mode Setting.

                         

  1. Use up & down arrows    to select the Operating Mode for your water. 


  1. Press the Tick Key    to confirm and return to the home screen.   




 ON  Turns hot water on continuously. 

    1       Turns hot water on for a single period of the day. (See Note)

AUTO  Your hot water will run your program schedule.

 OFF    Turns your hot water completely off. 

Note :  When setting the hot water in Operating Mode ‘1 - Once’ it will operate as follows : 


Turns ON at Program 1 On Time


Turns OFF at Program 3 Off Time

 


Boost :           The hot water ‘Boost’ operating mode allows you to turn on your hot water for a defined period of time (up to 9 hours). It temporarily overrides any current schedule set.


To Activate: 

  1. Press the Cog key    to toggle to the hot water zone.

                         

  1. Use up & down arrows    to select the period of time to boost your water. 


  1. Press the Tick Key    to confirm the hours selection.   


To De-Activate:

  1. Press the Cog key    to toggle to the hot water zone.

                         

  1. Use up & down arrows    to select ‘h0’. 


  1. Press the Tick Key    to confirm the hours selection.   


                                               _________________________