IT500- Inserting Batteries & Device Code

IT500- Inserting Batteries & Device Code

 iT500 : Inserting the Batteries & STA Device Code  (1.5.1) . 


  1. Remove the battery cover from the base of the iT500 thermostat. 


  1. Take a note of the full device code. This will be needed to register your device and may be useful should you require any Technical Support. 


  1. With the thermostat facing down, insert one new Alkaline AA Battery into the right hand side. 


  1. Insert the second battery into the left hand side. 


  1. Ensure the batteries are inserted with the correct polarity and are fitted securely in the unit. 


  1. Replace the battery cover. 


                                                         __________________________ 

    • Related Articles

    • IT500- Device Code Location & battery installation

       iT500 : STA Device Code  & battery Installation (7.2.5) .  The following document shows you the location of the Thermostats Device Code or ‘STA’ Number and how to correctly fit the batteries. Remove the battery cover from the base of the iT500 ...

    • How do I register my device on the App ?

       iT500 : Registering on the App (7.2.10) .  Description : The iT500 thermostat can be controlled from the App on your mobile phone, tablet or via the Website on your PC.  In this document we will look at the procedure to register a new device via ...

    • iT500 - Device is already connected.

      iT500 : Device is already Registered / Associated / Connected (6.4.3) . If when you are trying to register your device to an account you have just created, you get a message stating the “Device is already Registered / Associated / Connected to ...

    • iT500 - Q & A Section

      iT500 : Questions & Answers (7.1.1) . Description : This section aims to provide quick answers to any questions you may have and to signpost you to the relevant document if more information is required. Receiver : My receiver has a flashing blue ...

    • iT500 - Device is already connected.

      iT500 : Device is already Registered / Associated / Connected (7.2.12) . If when you are trying to register your device to an account you have just created, you get a message stating the “Device is already Registered / Associated / Connected to ...