iT500 - Operating Keys & Buttons

iT500 - Operating Keys & Buttons

 iT500 : Operating Keys and Buttons  (1.9.1. 


                   

Description :








Tick / Confirm       :


This is used for selecting options.




Return / Backup    :


A short press returns you to the previous screen. 

In Program Mode a long press returns you to the home screen without saving.

In Manual Override Mode a long press returns you to Auto Mode.

In Auto Mode a long press returns you to Manual Mode.





Cog / Settings        :


A long press enters Settings Mode. 

In Settings Mode use a short press to make a change or save a change.




Display ON           :


Wakes the screen from battery save mode.






Arrow Keys          :


Used to Scroll up and down a menu. Increases or Decreases a setting value.

Holding rolls value sequentially.    




                                                        ____________________________

    • Related Articles

    • iT500 - Heating Operating Modes Thermostat

      iT500 : Heating Operating Modes on the Thermostat (3.1.1) . Keys / Buttons needed : Cog/Settings Tick/Confirm Arrows Description : The Heating function on your thermostat has three different Operating Modes. These are Auto, Manual and Off. To ...
    • iT500 - Buttons not working

       iT500 : Buttons not working - Screen Lock  (7.2.4) .  If the buttons on your iT500 are not working but the thermostat still lights up and shows the current temperature when you press the ‘Display On’ button, then your thermostat has the screen lock ...
    • IT500 - Receiver Operating Modes

       iT500 : Receiver Operating Modes (3.3.1) . Description :      The iT500RX receiver has three Operating Modes –                                                  Auto,  Manual and Off.  In the event of failure of your iT500 System, the receiver ...
    • iT500 - Heating never comes on - Operating Modes on the Thermostat

      iT500 : Heating does not come on - Operating Modes (7.2.3) . If your heating does not come on at all, the first thing to check is that the iT500 is in Auto Mode. ‘AUTO’ should be visible in the bottom right of the thermostats display. If Auto is not ...
    • iT500 - Hot Water Operating Modes on the Thermostat

      iT500 : Hot Water Operating Modes - Thermostat (3.2.1) . Keys / Buttons needed : Cog/Settings Tick/Confirm Arrows Description : The Hot Water function has five Operating Modes : Auto, On, Once, Off and Boost. Procedure : Press the Cog key to toggle ...