Description :       The iT500 thermostat schedules can be programmed and                                             controlled from the App. 

Types of Schedules : The iT500 system has three different methods in which you       can program schedules. 

All :                          The first option allows you to define a set of times and temperatures for a program schedule that will run all week. It will perform the same schedule routine every day of the week.

5/2 :                        The second option defines two sets of program schedules. One set of times and temperatures will be used for the week period (Monday to Friday) and another separate set that will be used at the weekend (Saturday to Sunday), hence 5/2. 

Individual :                The last option lets you define a program schedule for each                                           day of the week individually, so you can have your heating                                           come on at different times and at different temperatures                                               every day.

App Procedure :

1.                                                                              2.

1. Press ‘Schedule’ in the lower left-hand corner of the screen. 

Then press the ‘next event’ in the bottom of the screen to begin entering your schedule. 

2. Select which schedule method is the most appropriate for you; ‘All’, ‘5/2’ or ‘Individual’.

                              3.                                                                     4.                                                                     5.

3.  When you select the ‘ALL’ program schedule method in the band just below ‘SCHEDULE’. The small arrow will display on ‘T’ (Thursday) to show that you are programming the entire week.

4.  When you select the ‘5/2’ program schedule method, the small arrow will point to ‘W’ (Wednesday) to show that you are programming the Monday-Friday Weekday (5) period. Pressing the ‘S’ (Saturday) will move the small arrow to in between ‘S’ and ‘S’ (Saturday and Sunday) to show you are now programming the weekend (2) period.

5.  When you select the ‘INDIVIDUAL’ program schedule method, the small arrow will display on ‘M’ (Monday) to show which day you are currently programming. Once the first day is completed, you can then press ‘T’ (Tuesday) to start programming the next day. Follow this procedure until you have the programmed each day of the week.

                              6.                                                                      7.                                                                    8.

6.   To begin programming a schedule press the arrow on the right-hand side of the first schedule Time and Setpoint.

7.   Scroll the Hour and Minutes display to select your desired start time. Then use the slider to set your desired Temperature and press ‘SAVE’ to confirm.

8. You will be returned to the schedule page to allow you to select the next Program Entry. Your heating will be maintained at the first temperature setpoint until the start time of the second entry. The heating will then be maintained at that temperature (16’C in the above example) until the start time of the third Program Entry and so on. 

9. Continue through each Program entry to set your desired options.

10. You also have the option to ‘Copy’ a program schedule, select which day or group of days you would like to copy it too and ‘Paste’ the schedule to that day or group of days.