IT500 - Receiver Operating Modes

IT500 - Receiver Operating Modes

 iT500 : Receiver Operating Modes (3.3.1) .

Description :      The iT500RX receiver has three Operating Modes –                                                  Auto,  Manual and Off. 

In the event of failure of your iT500 System, the receiver provides a manual override facility to turn your heating / hot water on and off.




The system is controlled by the program schedules in the thermostat and App.

The system is continuously switched ON.

The system is continuously switched OFF.




Central Heating Only

1 Zone 

Central Heating Only

2 Zones

Central Heating 1 Zone

plus Hot Water

    • Related Articles

    • IT500 - Receiver Controls

      iT500 : Receiver Controls  (1.3.3) . Description :     The iT500RX receiver is the switching part of your heating system. Wired directly to your boiler, pump and control valves the receiver controls your heating and hot water systems. In the event of ...
    • iT500 - Heating Operating Modes Thermostat

       iT500 : Heating Operating Modes on the Thermostat  (3.1.1) .          Keys / Buttons needed :        Cog/Settings     Tick/Confirm     Arrows        Description : The Heating function on your thermostat has three different Operating Modes. These are ...
    • iT500 - Manual Mode on the Thermostat

       iT500 : Manual Mode on the Thermostat  (5.6.1) .                          Keys / Buttons needed :      Cog/Settings      Tick/Confirm     Arrows           Description :  In Manual Mode your thermostat will not run any program schedules but allow you ...
    • iT500 - Heating Operating Modes App

       iT500 : Heating Operating Modes (App)  (3.1.2) .  Description :             The Heating function has three Operating Modes : Schedule, Manual and Off. Operating Modes :                                            2.                                   ...
    • iT500 - Heating never comes on - Operating Modes on the Thermostat

       iT500 : Heating does not come on - Operating Modes  (7.2.3) .  If your heating does not come on at all, the first thing to check is that the iT500 is in Auto Mode. ‘AUTO’ should be visible in the bottom right of the thermostats display.              ...