How do I register my device on the App ?

How do I register my device on the App ?

 iT500 : Registering on the App (7.2.10) . 


Description : The iT500 thermostat can be controlled from the App on your mobile phone, tablet or via the Website on your PC. 


In this document we will look at the procedure to register a new device via the App on your phone or tablet.


                     1.                                              2.                                             3.

    


  1. Locate the iT500 Plus App on your Mobile Phone. 


  1. Load the iT500 Plus App and then click ‘Register’ in the bottom right-hand corner. 


  1. Fill in your Email address and choose a Password,                                                         

            Read and Press to Accept Terms and Conditions

            Read and Press to Accept Privacy Notice,

            Select whether to receive correspondence from Salus Controls,       

            Then Click the ‘Next’ button. 


 You will now receive an email containing your ‘activation code’.             

This is needed to activate your new account. 

                                                                    4.   

      

      


  1. Enter the activation code found in your email. This needs to be done within 60 minutes or the code will expire, and the registration process will fail.              Click the ‘Submit’ button to continue the registration process. 



                                 5. 

           


  1. Fill in your personal details and click ‘Next’.


  1. For the next step you will require your Device Code or STA Number


This can be found on a label under the batteries. Remove the battery cover and batteries from the bottom of your thermostat as shown below :-



 



  1. Enter the complete STA code from your device. Then choose a name for your thermostat. This is for your reference and can be anything you like. Then click ‘submit’ to register the device.


        

        




  1. Your registration information is now sent to the Salus Controls Server.


Please wait at this stage, do not refresh the page, this may take a few minutes. 

                                   

        

        




  1. Now choose your required option on the ‘Settings’ page.             The darker grey indicates your selection. To continue click ‘Save’.



  1. That concludes the registration process. 


You will now be presented with a series of optional ‘Advice’ screens to look through. Alternatively click ‘Skip’ to Finish. 



Advice Screens :

           


           

           

           



                                                         ________________________
    • Related Articles

    • IT500 - The app says my device is offline.

      iT500 : App says my iT500 is ‘offline’  (7.2.8) .  Description :  If you are experiencing problems with controlling your thermostat from the App on your mobile device or your App displays the Manage Devices screen when you log in then this document ...
    • iT500 - Registering on the App

       iT500 : Registering on the App (6.4.2) .  Description : The iT500 thermostat can be controlled from the App on your mobile phone, tablet or via the Website on your PC.  In this document we will look at the procedure to register a new device via ...
    • iT500 - Registering on the App

       iT500 : Registering on the App (1.8.3) .  Description : The iT500 thermostat can be controlled from the App on your mobile phone, tablet or via the Website on your PC.  In this document we will look at the procedure to register a new device via ...
    • iT500 - Device is already connected.

      iT500 : Device is already Registered / Associated / Connected (6.4.3) . If when you are trying to register your device to an account you have just created, you get a message stating the “Device is already Registered / Associated / Connected to ...
    • iT500 - Device is already connected.

      iT500 : Device is already Registered / Associated / Connected (7.2.12) . If when you are trying to register your device to an account you have just created, you get a message stating the “Device is already Registered / Associated / Connected to ...