| | | | | | | | |
| | | | | | | |
| | | | | | | |
When the iT500 thermostat is connected to the internet the Time and Date will be set automatically. However, this can also be done manually using the procedure below.
| | | | | | | |
| - Press and Hold the Cog key
 for approximately 5 Seconds.
Heating Zones will now flash.
| | | | | | |
| - Press the Cog key
 again, ‘hr’ is displayed on screen.
Press tick  to confirm.
’12 hr’ is now displayed on the screen.
| | | | | | |
| - Up & Down arrows
 will Select 12 or 24 Hour Format.
Press tick to confirm.
| | | | | | |
| - Up & Down arrows to select the correct Hour.
Press tick  to confirm.
| | | | | | |
| - Up & Down arrows to select the correct Minutes.
Press tick to confirm.
Set Date option will now appear on screen.
| | | | | | |
| - Up & Down arrows to select the correct Day.
Press tick to confirm.
| | | | | | |
| - Up & Down arrows to select the correct Month.
Press tick to confirm.
| | | | | | |
| - Up & Down arrows to select the correct Year.
Press tick to confirm.
|