iT500 - Set Time & Date

iT500 - Set Time & Date

 iT500 : Time & Date  (5.2.1) . 

                         

Keys/Buttons                  Needed


Cog/Settings


Tick/Confirm


Arrows


Description :


When the iT500 thermostat is connected to the internet the Time and Date will be set automatically. However, this can also be done manually using the procedure below.

Procedure :
  1. Press and Hold the Cog key  for approximately 5 Seconds.

Heating Zones will now flash.


  1. Press the Cog key   again, ‘hr’ is displayed on screen. 

Press tick    to confirm.


’12 hr’ is now displayed on the screen.


  1. Up & Down arrows    will Select 12 or 24 Hour Format. 

Press tick    to confirm.


  1. Up & Down arrows     to select the correct Hour.

Press tick    to confirm.


  1. Up & Down arrows    to select the correct Minutes. 

Press tick    to confirm.

Set Date option will now appear on screen.


  1. Up & Down arrows    to select the correct Day.

Press tick    to confirm.


  1. Up & Down arrows    to select the correct Month.

Press tick     to confirm.


  1. Up & Down arrows    to select the correct Year.

Press tick    to confirm.  



                                                  ___________________________

    • Related Articles

    • iT500 - Set Time & Date

      iT500 : Time & Date (1.7.1) . Keys/Buttons needed Cog/Settings Tick/Confirm Arrows Description : When the iT500 thermostat is connected to the internet the Time and Date will be set automatically. However, this can also be done manually using the ...

    • iT500 - Setting Time Zone

       iT500 : Setting Time Zone & Daylight Saving  (5.2.2) .                Keys / Buttons needed :      Cog/Settings       Tick/Confirm     Arrows   Description :                        When the iT500 Thermostat is connected to the internet, the Time ...

    • iT500 - Setting Time Zone & DST

       iT500 : Setting Time Zone & Daylight Saving Time  (1.7.2) .                 Keys / Buttons needed :      Cog/Settings       Tick/Confirm     Arrows   Description :                        When the iT500 Thermostat is connected to the internet, the ...

    • IT500 - FAQ

      Question: The antenna on this thermostat is no longer functioning – gateway LED is off Answer: If the thermostat gateway LED is off and does not turn on even after connecting to another power source, it is very likely that it is defective and needs ...

    • IT500 - Firmware Update Failing

       iT500 : Firmware Updates (7.2.7) .  Description : Your iT500 Thermostat is capable of receiving OTA (Over The Air) Firmware Updates. These are used to keep the software up to date with external changes that may affect your system for example Apple ...