iT500 - Setting Time Zone

iT500 - Setting Time Zone

 iT500 : Setting Time Zone & Daylight Saving  (5.2.2) . 

 

           

Keys / Buttons needed :      Cog/Settings       Tick/Confirm     Arrows  



Description :

                       When the iT500 Thermostat is connected to the internet, the Time Zone will be set automatically using the internet connection. However, this can be set manually using the Procedure below. 

Procedure :

  1. Press and Hold the Cog key    and the Up Arrow key   together.

The Heating Zones will now flash.
  1. Press the Tick key     Zone 1 (the house) will now flash. 

Press tick   again to confirm.
  1. A Flame will now display next to the house, this represents Heating Mode. If Cooling Mode is required, use the    to select the Fan icon. 

Press tick    to confirm. 
  1.  ‘C  or ‘F will flash. (Centigrade / Fahrenheit )

Press tick    to confirm.
  1. 0 hr will flash. (This is the Time Zone Setting where ‘0hr’ = GMT)

Use the Arrow Keys to set Time Zone, please see the charts below.

Press tick    to confirm.

6.   dst on or dst off will flash.  (Daylight Saving Time)                                     AAPress tick    to confirm. 



European Time Zones :

        

         

                                                  ______________________

    • Related Articles

    • iT500 - Setting Time Zone & DST

       iT500 : Setting Time Zone & Daylight Saving Time  (1.7.2) .                 Keys / Buttons needed :      Cog/Settings       Tick/Confirm     Arrows   Description :                        When the iT500 Thermostat is connected to the internet, the ...

    • iT500 - Zone Selection

      iT500 : Zone Selection (5.5.0) . Keys / Buttons needed : Cog/Settings Tick/Confirm Arrows Description : Heating Zones should be configured by a qualified Heating Engineer as the most appropriate layout will depend on the properties heating system. ...

    • Setting Program Schedules on the Thermostat

      iT500 : Setting Program Schedules on the Thermostat (4.3.1) Keys / Buttons needed : Cog/Settings Tick/Confirm Arrows Description : The iT500 thermostat schedules can be programmed remotely on the device in the event of the User having no internet ...

    • iT500 - Set Time & Date

      iT500 : Time & Date (5.2.1) . Keys/Buttons Needed Cog/Settings Tick/Confirm Arrows Description : When the iT500 thermostat is connected to the internet the Time and Date will be set automatically. However, this can also be done manually using the ...

    • iT500 - Set Time & Date

      iT500 : Time & Date (1.7.1) . Keys/Buttons needed Cog/Settings Tick/Confirm Arrows Description : When the iT500 thermostat is connected to the internet the Time and Date will be set automatically. However, this can also be done manually using the ...