SALUS IT800 Thermostat Setup Guide: Mastering Offline and Online Pairing

This guide provides a comprehensive, image-guided walkthrough for setting up and pairing your SALUS IT800 thermostat, both in offline and online modes. This aims to help you seamlessly integrated with the SALUS system and enjoy optimal control over your home's heating.

Part 1: IT800 Offline Pairing

These should be the first step if the signal and set up is hard to reach.

Step 1: Initiate Receiver Pairing This process need to ensure to have it ready for setting up.

 1. Press and Hold ZigBee: Press and hold the ZigBee button on the receiver for 3 seconds. The ON/OFF button will begin to flash blue, indicating it’s in pairing mode.

​

2. Start to navigate in the menu to find: use the scroll up and scroll down to find an option to reset the setting.

Step 2: Resetting the Thermostat

The setting should be set back to the factory setting

1. Accessing Factory Reset: Press and hold the button on top of the thermostat until the display lights up. Then, turn the dial to show “Fr” (Factory Reset). Confirm with a short press on the button on the top.

Step 3: Choosing Settings Setting the settings is a MUST for it to be paired to device.

1. Finding the option for yes: In the settings chose "yes" to reset the Thermostat.

Step 4: Ending Pairing

1. Linking: The signal icon will stop flashing then the thermostat and receiver is paired.Press and hold the ZigBee button on the receiver in 3 sec. To stop the pairing mode. The ON/OFF button will light green.

Part 2: IT800 Online Setup via Salus Premium Lite app

These instructions is to get it set up over the internet and remote set up.

Step 1: Prepare To be Searched

This part the settings is readied for connecting.

1. Activation : hold and press the button till the screen shows up as you can see here.

​

Step 2: Activate Receiver in the Application

Now that the device is ready, chose which way it will connect to it.

1. **Choosing the device: Select the network of which method to use, WIFI or from internet then select.

Step 3: Add It to the application Follow this to complete set up with the application

1. Activate in Set up by following: This will follow the procedure for all steps of the device to be correctly set up.

Step 4: Final setup steps in the application - Final preparations for setting what the application can do to the device.

1. Choose set up with bluetooth now the steps for set up with bluetooth is finish

Step 5: Link It to the Equipment - The equipment now can be linked and what to expect after these final adjustments.

1. Choose The type of it and link it.

Now with both the offline and online methods are ready for your thermostat.

• Related Articles

• IT800 WIFI Smart Thermostat Instruction Manual

  Introduction The IT800 WIFI Smart Thermostat is a wireless ZigBee thermostat that controls the pre-paired WZ600 Zigbee Wi-Fi Receiver, which has a single-channel relay. It is the coordinator of the network, allowing devices to join the network and ...

• iT800 - FAQs

  Question: Where are custom schedules on the iT800? Answer: There are 2 ways to get to get to custom schedules. When only the thermostat is pinned to the dashboard you will see the schedule under the thermostat on dashboard, scroll down, use the pen ...

• IT800 WIFI Quick Guide

  .

• IT800WIFI - Technical Specification

  The IT800 is a Smart thermostat with automation and optimization. It is Boiler Plus compatible. It includes an RF receiver with a single channel relay, designed to control both heating and cooling systems. It is not part of Salus Smart Home but users ...

• Issue UK 64448. Where is the STA number please | is there any other way to find it?

  The IT800 does not have an STA number. Are you actually referring to IT500? Is so, it’ is located within the battery compartment of the thermostat.