PS600 - Smart Pipe Sensor

PS600 - Smart Pipe Sensor

        
The PS600 temperature sensor measures and reports the measured temperature periodically. The measured temperatures can be used in a variety of ways depending on the system configuration: by association with cooling / heating systems, lighting systems or with the products connected to smart outlets, water valves, etc.

The sensor measuring range is an important feature and it offers the possibility to use the product to send notifications related to temperature values, to create safety methods by associating with other devices, or to collect data for good analysis. operation of heating / cooling systems.

This product should be used in conjunction with the Universal Gateway (UG600) and the Salus Smart Home application.

  

    • Related Articles

    • WLS600 - Water Leak Sensor

                          The new SALUS WLS600 Water Leak Sensor is designed to detect the presence of water. This can be done using the main sensor directly or via the remote sensing lead included. The unique design allows vertical or horizontal fitting.
    • DI600 - Smart Dimmer Switch

               DI600 is a Zigbee-controlled dimmer relay, that can be used for controlling different light sources. This product must be used with the Universal Gateway UG600/UGE600 and Salus Smart Home App
    • SB600 - Smart Button

               The Smart Button is used to trigger the “One touch” and “My Status” rules that you have created for your SALUS Smart Home system. Normally “One touch” and “My Status” rules are triggered via the SALUS Smart Home app, however the Smart Button ...
    • CSB600 - Covered Smart Button

      The Protective Smart Button can be used during a panic situation in order to trigger the “One touch” and “My Status” rules that you have created for your Salus Smart Home system . Normally “One touch” and “My Status rules are triggered via the Salus ...
    • SW600 - Videos and Manuals

      The new window sensor is a small, slim, wireless piece of equipment that detects when a window is open or closed and reports this to the SALUS Smart Home App. This product must be used with the SALUS Smart Home gateway.