RE10RF - Smart Home ZigBee Repeater

RE10RF - Smart Home ZigBee Repeater

If your iT600 system has more than 32 battery-powered devices, alongside the CO10RF ZigBee coordinator/G30 Gateway or UGE600 Universal Gateway you must add an RE10RF ZigBee repeater.

You must also add an RE10RF repeater if the battery-powered devices in your iT600 system are too far away from the mains-powered devices.

    • Related Articles

    • RE600 - Repeater

      The new SALUS RE600 repeater is the latest addition to the SALUS Smart Home range of products. The RE600 Repeater is a hardwired signal booster that allows you to extend the range of your SALUS Smart Home System, to eliminate blackspots in larger ...
    • DI600 - Smart Dimmer Switch

      DI600 is a Zigbee-controlled dimmer relay, that can be used for controlling different light sources. This product must be used with the Universal Gateway UG600/UGE600 and Salus Smart Home App
    • Salus Smart Home

      Salus Smart Home System. Salus Domestic Salus Commercial
    • SB600 - Smart Button

               The Smart Button is used to trigger the “One touch” and “My Status” rules that you have created for your SALUS Smart Home system. Normally “One touch” and “My Status” rules are triggered via the SALUS Smart Home app, however the Smart Button ...
    • ECM600 - Smart Electric Monitor

          Electric Monitors measure and record electricity consumption to help supplement a user’s understanding of their energy usage on a circuit by circuit basis. This information can be helpful for those wanting to reduce energy usage or adopt ...