RE600 - Repeater

RE600 - Repeater

       
    
The new SALUS RE600 repeater is the latest addition to the SALUS Smart Home range of products.

The RE600 Repeater is a hardwired signal booster that allows you to extend the range of your SALUS Smart Home System, to eliminate blackspots in larger buildings or those with particularly thick walls or flooring. 



    • Related Articles

    • SB600 - Smart Button

      The Smart Button is used to trigger the “One touch” and “My Status” rules that you have created for your SALUS Smart Home system. Normally “One touch” and “My Status” rules are triggered via the SALUS Smart Home app, however the Smart Button provides ...
    • PS600 - Smart Pipe Sensor

               The PS600 temperature sensor measures and reports the measured temperature periodically. The measured temperatures can be used in a variety of ways depending on the system configuration: by association with cooling / heating systems, ...
    • RE10RF - Smart Home ZigBee Repeater

      If your iT600 system has more than 32 battery-powered devices, alongside the CO10RF ZigBee coordinator/G30 Gateway or UGE600 Universal Gateway you must add an RE10RF ZigBee repeater. You must also add an RE10RF repeater if the battery-powered devices ...
    • DI600 - Smart Dimmer Switch

      DI600 is a Zigbee-controlled dimmer relay, that can be used for controlling different light sources. This product must be used with the Universal Gateway UG600/UGE600 and Salus Smart Home App
    • CSB600 - Covered Smart Button

      The Protective Smart Button can be used during a panic situation in order to trigger the “One touch” and “My Status” rules that you have created for your Salus Smart Home system . Normally “One touch” and “My Status rules are triggered via the Salus ...