RT310i - Inserting Batteries & Device Code

RT310i - Inserting Batteries & Device Code

 RT310i : Inserting the Batteries & STA Device Code  (1.5.1) . 


  1. Slide down the battery cover in the front lower section of the RT310i thermostat. 


  1. Take a note of the full device code. This will be needed to register your device and may be useful should you require any Technical Support.


  1. Insert two new AA Alkaline batteries, ensuring they are securely fitted with the correct polarity.


  1. Replace the battery cover by sliding it up from the very bottom of the device ensuring the cover is sat on the sliders. 


                                                    _______________________


    • Related Articles

    • RT310i - Device already connected.

      RT310i : Device is already Registered / Associated / Connected (6.4.3) . If when you are trying to register your device to an account you have just created, you get a message stating the “Device is already Registered / Associated / Connected to ...

    • RT310i - Device already connected.

      RT310i : Device is already Registered / Associated / Connected (6.4.3) . If when you are trying to register your device to an account you have just created, you get a message stating the “Device is already Registered / Associated / Connected to ...

    • RT310i - Manuals

    • RT310i - Registering on the App

       RT310i : Registering on the App (1.8.3) .  Description : The RT310i thermostat can be controlled from the App on your mobile phone, tablet or via the Website on your PC.  In this document we will look at the procedure to register a new device via ...

    • RT310i - Registering on the App

      RT310i : Registering on the App (1.8.3) . Description : The RT310i thermostat can be controlled from the App on your mobile phone, tablet or via the Website on your PC. In this document we will look at the procedure to register a new device via the ...