RT310i - Installation of the RXRT510 Receiver

RT310i - Installation of the RXRT510 Receiver

 RT310i : Installation of the RXRT510 Receiver  (1.3.1) .


Note :  This accessory must be fitted by a competent person, and installation   must comply with the guidance provided in the current IEE Wiring   Regulations and current Building Regulations. Failure to comply with   the requirements of these publications could lead to prosecution.




Installation Procedure :


Unscrew the backplate of the RXRT510 receiver to perform the wiring connections.






Wiring Diagram :



Wall Mounting :


  1. Fix the detachable backplate to the wall using the fixings supplied.



  1. Hook the top of the receiver onto the lugs on the backplate, align the front housing with the screws on the underside.



  1. Press lightly on the front housing and lightly tighten the screws on the underside. 




                                                  ______________________________

    • Related Articles

    • RT310i Receiver Operating Modes

       RT310i : Receiver Operating Modes  (3.2.1) . Description : The RXRT510 receiver is the switching part of your heating system. Wired directly to your boiler, pump and control valves the receiver controls your heating.                                 ...
    • RT310i Receiver Controls

       RT310i : Receiver Controls  (1.3.3) . Description : The RXRT510 receiver is the switching part of your heating system. Wired directly                  to your boiler, pump and control valves the receiver controls your heating.         Red LED ON OFF ...
    • RT310i - Pairing with the RXRT510 Receiver

       RT310i : Pairing with the RXRT510 Receiver  (1.6.1) . Description : Pairing establishes a communications link between your Thermostat and the Receiver. If your thermostat is failing to control your boiler then your devices probably need ...
    • RT310i - Pairing with the RXRT510 Receiver

      RT310i : Pairing with the RXRT510 Receiver (1.6.1) . Description : Pairing establishes a communications link between your Thermostat and the Receiver. If your thermostat is failing to control your boiler then your devices probably need pairing. With ...
    • RT310i - Red Flashing Light on the Receiver

      RT310i : Red Flashing Light on the Receiver - Pairing (7.2.1) . Description : A red flashing light on your Receiver means that the communications link between your Thermostat and Receiver has been lost and your devices need pairing. Your Thermostat ...