RT310i Receiver Operating Modes

RT310i Receiver Operating Modes

 RT310i : Receiver Operating Modes  (3.2.1) .

Description :


The RXRT510 receiver is the switching part of your heating system. Wired directly to your boiler, pump and control valves the receiver controls your heating.



                                 


Red LED

ON

OFF

The receiver is on and successfully paired.

 When in Manual Mode, ON will turn the Boiler On. 

When in Manual Mode,   Off will turn the Boiler Off.




Green LED


Auto

Manual

The Thermostat is calling for Heat and the Boiler has been switched On.

The system receiver output will switch On and Off in relation to the command from the Thermostat.

The system receiver output is controlled by use of the On / Off slide switch..


                                                                  
___________________________
    • Related Articles

    • RT310i - Heating Operating Modes - Thermostat

      Coming Soon.
    • RT310i - Heating Operating Modes App

       RT310i : Heating Operating Modes (App)   (3.1.2) .  Description :             The Heating function has three Operating Modes : Schedule, Manual and Off. Operating Modes :                       1.                                           2.          ...
    • RT310i Operating Keys & Buttons

       RT310i : Operating Keys and Buttons  (1.9.1) . Description : There are few user controls for the RT310i, making this thermostat very easy to operate. These controls are shown below, along with a description of each of their functions. The ...
    • RT310i Receiver Controls

       RT310i : Receiver Controls  (1.3.3) . Description : The RXRT510 receiver is the switching part of your heating system. Wired directly                  to your boiler, pump and control valves the receiver controls your heating.         Red LED ON OFF ...
    • RT310i - Installation of the RXRT510 Receiver

       RT310i : Installation of the RXRT510 Receiver  (1.3.1) . Note :  This accessory must be fitted by a competent person, and installation   must comply with the guidance provided in the current IEE Wiring   Regulations and current Building Regulations. ...