RT310i - Reset Procedures

RT310i - Reset Procedures

 RT310i : Reset Procedures  (5.6.1) .

Description :     The RT310i Thermostat and the iTG310 Gateway can be reset                                   using the procedures below.

Thermostat Reset: 


In order to perform a soft reset or ‘reboot’ of the device, simply remove one  of the batteries for a short period of time and re-insert.

                                        



Gateway Reset : 


  The Gateway can simply be ‘rebooted’ by removing both cables and leaving them out for a duration of 15 minutes. 

                          

               


Receiver Reset :

 

The RXRT510 Receiver does not have a reset button, however it can be reset by turning it off at the boilers mains power supply (usually a fused spur switch near the boiler) for a short period of time.

                                

                                                    _____________________________


    • Related Articles

    • RT310i - Q & A Section

      Question: What power supply adapter is used for the RT310i gateway? Answer: The iTG310 and iTG500 gateways use same power adapter rated at 5DC V, pin size 10mm long/deep, 3.46 mm outer (negative), 1.3mm inner (positive). A universal multi head power ...

    • RT310i - Manuals

    • RT310i Range - Q&A

      Question: If I do not have the ITG310i gateway, how can I connect to the app? Answer: For the RT310RF thermostat model, connection to the mobile app is not possible. Only if you have the RT310i model can it be connected to the dedicated RT310i app. ...

    • RT310i - Holiday Mode

       RT310i : Holiday Mode  (5.4.1) .  Description :   Holiday Mode switches your heating or cooling off for a defined                                       length of time. Frost Protection will be activated in heating holiday                            ...

    • RT310i - Red Light on the Gateway

      RT310i : Gateway Red Light - Internet Connectivity (7.2.2) . If you have got a red light on the corner of your RT310i Internet Gateway it means your device does not have a connection to the Salus Server through the Internet. The first thing to try is ...