RT310RF - Installation of the Receiver

RT310RF - Installation of the Receiver


 RT310RF : Installation of the RXRT510 Receiver  (1.3.1) .


Note :  This accessory must be fitted by a competent person, and installation must comply with the guidance provided in the current IEE Wiring Regulations and current Building Regulations. Failure to comply with the requirements of these publications could lead to prosecution.





Installation Procedure :


Unscrew the backplate of the RXRT510 receiver to perform the wiring connections.








Wiring Diagram :




Wall Mounting :



  1. Fix the detachable backplate to the wall using the fixings supplied.




  1. Hook the top of the receiver onto the lugs on the backplate, align the front housing with the screws on the underside.



  1. Press lightly on the front housing and lightly tighten the screws on the underside. 




                                                 

                                                     ______________________________

    • Related Articles

    • RT310RF & RT310TX - Wiring Diagrams

      RT310RF : Wiring Diagrams (1.3.2) . Volt Free. 230v Switching. _____________________________________________________________
    • RT310RF - What's in the Box

       RT310RF : What’s in the Box  (1.1.1) .  Thermostat :    The RT310RF room thermostat simply switches the heating system on and off as necessary by transmitting a signal via RF to the Receiver which in turn is connected to your system boiler. It works ...
    • RT310RF - Receiver Controls

      ​  RT310RF : Receiver Controls  (1.3.3) . Description : The RXRT510 receiver is the switching part of your heating system. Wired directly to your boiler, pump and control valves the receiver controls your heating.                  Red LED ON OFF ...
    • RT310RF - Pairing with the RXRT510 Receiver

      ​  RT310RF : Pairing with the RXRT510 Receiver  (2.1.1) . ​ Description : Pairing establishes a communications link between your Thermostat and the Receiver. If your thermostat is failing to control your boiler then your devices probably need ...
    • RT310RF & RT310TX - Pairing with the RXRT510 Receiver

      ​  RT310RF : Pairing with the RXRT510 Receiver  (1.5.1) . Description : Pairing establishes a communications link between your Thermostat and the Receiver. If your thermostat is failing to control your boiler then your devices probably need ...