RT310RF - Reviewing the Setpoint Temperature

RT310RF - Reviewing the Setpoint Temperature

 RT310RF : Reviewing Setpoint Temperature  (3.1.1) .


Reviewing The Setpoint Temperature :                                                             

                                     

Buttons Used and  


Description :

                        To view your current Setpoint Temperature simply press one of the arrow                           keysor once.



            Actual Room Temperature                                             Setpoint Temperature



If your thermostat is operating in Frost Protection Mode, then when you review the setpoint temperature the display will show you the current Frost Setpoint Temperature along with the Frost Protection Icon.



                                      



After a couple of seconds your thermostat will return to Normal Mode with the current room temperature displayed on the screen.


                                              ________________________


    • Related Articles

    • RT310RF - Adjusting Setpoint Temperature

      RT310RF : Adjusting the Setpoint Temperature (3.2.1) . Buttons Used and Description : By changing the Setpoint temperature, you are permanently altering your temperature. You can change the set point temperature very easily while you are reviewing ...

    • RT310RF - Temperature Display Increments

      RT310RF : Installer Mode – Temperature Display Increments (4.8.1) . Description : Installer Mode takes you into the device installation settings which on the RT310 Series allows you to change the settings in the table below. Setting No. Function ...

    • RT310RF - Frost Setpoint

      RT310RF : Installer Mode – Frost Setpoint (4.4.2) . Description : Installer Mode takes you into the device installation settings which on the RT310 Series allows you to change the settings in the table below. Setting No. Function Parameter ...

    • RT310RF - Temperature Offset

      RT310RF : Installer Mode – Temperature Offset (4.3.1) . Description : Installer Mode takes you into the device installation settings which on the RT310 Series allows you to change the settings in the table below. Setting No. Function Parameter ...

    • RT310RF - Unable to change Temperature and 5'C on the screen - Frost Protection

      ​  RT310RF : 5’C on screen and unable to change temperature  (6.2.3) .                                                          Buttons Used   Description : If your display is showing 5’C (or a figure between 5’C and 17’C) and you are unable to ...