RT310RF & RT310TX - Thermostat Setup - Dip Switches

RT310RF & RT310TX - Thermostat Setup - Dip Switches

 RT310RF : Thermostat Setup – Dip Switch Settings  (1.4.1) .


Thermostat Dip Switches :

On the back of the thermostat there are two small dip switches. 




  1. CPH Setting or The Maximum ‘Cycles Per Hour’. This is the number of times per hour that your boiler turns On and Off in order to maintain a desired setpoint temperature. This is typically left at its default setting and not changed.


  1. The second switch on the rear of your thermostat can be used to change the span. The span is the accuracy with which the thermostat operates when displaying your temperature. You can increase the accuracy by setting the span to +/-0.25°C instead of the default of +/-0.5°C, meaning that your thermostat will be sensitive to a quarter of a degree temperature change and will activate/deactivate the boiler more frequently.


When you have selected your desired span setting, please insert two new Alkaline AA batteries into your thermostat and it will power up.


         


                                              ____________________________

    • Related Articles

    • RT310RF - Testing the RF Transmissions

      RT310RF : Testing the RF Transmissions  (1.5.2) . Description :                        It is important to site both the receiver and thermostat in locations where the RF (Radio Frequency) signal cannot be interrupted. The receiving range between the ...

    • RT310RF & RT310TX - Testing the RF Transmissions

      RT310RF : Testing the RF Transmissions  (1.5.2) . Description :                        It is important to site both the receiver and thermostat in locations where the RF (Radio Frequency) signal cannot be interrupted. The receiving range between the ...

    • RT310RF - Operating Keys & Buttons

       RT310RF : Operating Keys and Buttons  (1.6.1) . Description : There are few user controls for the RT310RF, making this thermostat very easy to operate. These controls are shown below, along with a description of each of their functions. The ...

    • RT310RF - Receiver Controls

      ​  RT310RF : Receiver Controls  (1.3.3) . Description : The RXRT510 receiver is the switching part of your heating system. Wired directly to your boiler, pump and control valves the receiver controls your heating.                  Red LED ON OFF ...

    • RT310 Series Manuals