RT510 - Turning your Heating On

RT510 - Turning your Heating On



RT510 Series Thermostat - Turning your heating on (3.1.1)

How do I turn my heating on, and get the boiler to fire up ? 


  1. To turn your heating on, you will need to raise the set point temperature above the current room temperature using the Up Arrow  . 


  1. A flame symbol will be displayed showing the thermostat is now calling for heat and your boiler will run until the room reaches the new set point.


  1. The desired setpoint temperature will now be maintained and the boiler will only run when the room temperature drops below your selected temperature to bring it back up to the setpoint.


  1. If you want to reduce your set point temperature, use the Down Arrow button  to change the setpoint to below your current room temperature. 


The flame symbol will disappear to show the thermostat is no longer calling for heat, and your boiler will stop.

    

                                                   ____________________________




    • Related Articles

    • RT510 Series Thermostat Videos

      Pairing. Follow this procedure if you have a red flashing light on your Receiver. ​ ​ Receiver Controls ( Auto/Manual Mode, LED's Explained) Common Issues and Frequently Asked Questions General Use : Turning your Heating On Blank Screen - No Display ...

    • RT510+ Series : Manuals

    • RT510 - Programs Schedules Explained

       RT510 Series : Program Schedules Explained (4.1.1) . Description :      Program schedules allow you to specify which times of the day you want your heating to come on and to what temperature you would like it to maintain your house. The RT510 Series ...

    • RT510RF - Introduction & How it Operates

       RT510RF : How it Operates  (1.2.1) . The programmable room thermostat RT510RF is both a programmer and a room thermostat. A programmer allows you to set ‘On’ and ‘Off’ time periods to suit your own lifestyle. A room thermostat works by sensing ...

    • RT510RF - Red flashing Light on Receiver

      RT510RF : Red Flashing Light on the Receiver - Pairing (7.2.2). Description :        A red flashing light on your Receiver means that the communications link between your Thermostat and Receiver has been lost and your devices need pairing. Your ...