RT510RF - Holiday Mode

RT510RF - Holiday Mode



 RT510RF : Holiday Mode  (5.5.1) .

  

                                                  

                                                      Buttons Used

  


Description :

If you are going away or want to turn your heating “off” for a short period of time , ( up to 31 days) you can use the Holiday function. Frost Protection will be activated when in Holiday Mode.

  


  1. To activate holiday mode, press the button with an Aeroplane icon above the LCD display for approximately 5 seconds until Zero Days can be seen flashing on the display.  



  1. Using the arrow buttons, select the number of days required for the holiday period.



  1. Slide down the front cover to reveal the                        and  buttons.



  1. Press  to apply your chosen setting.



  1. At the top of the screen, you will now see the number of days selected with an aeroplane icon in the top right-hand corner of the screen.



  1. Your Holiday function is now set.

                                                           


                                                    ___________________________

    • Related Articles

    • RT510RF - Installer Mode

       RT510RF : Installer Mode  (1.4.2) . Description : Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function Parameter Description Default Value ...

    • RT510RF - Programming Mode Selection (Installer Mode)

      RT510RF : Installer Mode – Programming Mode Selection (5.13.1) . Description : Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...

    • RT510RF Installer Mode - Programming Mode Selection

      RT510RF : Installer Mode – Programming Mode Selection (4.2.1) . Description : Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...

    • RT510RF - Sleep Mode

       RT510RF : Sleep Mode  (5.8.1) . Description : Sleep Mode allows your Thermostat to be put into a state where all of its functions are paused / switched off to save battery power with the exception of the clock which will continue to run in the ...

    • RT510RF - Manual Mode

       RT510RF : Manual Mode  (5.3.1) . Description :  If you want to use your thermostat Manually to select your desired room or setpoint temperature,  rather than running to set programme schedules you need to select Manual Mode. Procedure :  To use the ...