RT510RF - Installation of the Receiver

RT510RF - Installation of the Receiver

 RT510RF : Installation of the RXRT510 Receiver  (1.3.1) .

Note :  This accessory must be fitted by a competent person, and installation must comply with the guidance provided in the current IEE Wiring Regulations and current Building Regulations. Failure to comply with the requirements of these publications could lead to prosecution.

Installation Procedure :

Unscrew the backplate of the RXRT510 receiver to perform the wiring connections.

Wiring Diagram :

Wall Mounting :

  1. Fix the detachable backplate to the wall using the fixings supplied.

  1. Hook the top of the receiver onto the lugs on the backplate, align the front housing with the screws on the underside.

  1. Press lightly on the front housing and lightly tighten the screws on the underside. 


    • Related Articles

    • RT510RF - Wiring Diagrams

       RT510RF : Wiring Diagrams  (1.3.2) . Volt Free. 230v Switching. ​                                                        __________________________________
    • RT510RF - What's in the Box

       RT510RF : What’s in the Box  (1.1.1) .  Thermostat :    The programmable room thermostat RT510RF is both a programmer and a room thermostat. A programmer allows you to set ‘On’ and ‘Off’ time periods to suit your own lifestyle. A room thermostat ...
    • RT510RF Receiver Controls

      ​  RT510RF : Receiver Controls  (1.3.3) . Description : The RXRT510 receiver is the switching part of your heating system. Wired directly to your boiler, pump and control valves the receiver controls your heating.                  Red LED ON OFF ...
    • RT510 Wiring Diagrams (Hard Wired)

       RT510 : Wiring Diagrams  (1.4.3) .                                                                                                                           ________________________
    • RT510RF - Pairing with the wall mounted Receiver

      Pairing Pre-October 2018 Device ​ Pairing Post October 2018 Device ​  RT510RF : Pairing with the RXRT510 Receiver  (2.1.1) . Description : Pairing establishes a communications link between your Thermostat and the Receiver. If your thermostat is ...