RT510RF - Installer Mode

RT510RF - Installer Mode


 RT510RFInstaller Mode  (1.4.2) .


Description :


Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below.



Setting No.

Function

Parameter

Description

Default Value

d01

Temperature Display Increments

0.1°C or 0.5°C

Select the temperature display increments.

0.5°C

d02

Temperature Offset

+/-3.0°C

Calibrate your thermostat temperature.

0.0°C

d03

Frost Setpoint

5.0°C to  17.0°C

Set the Frost Point Temperature.

5.0°C

d04

Programmer Selection

5/2 or 24hr (7d)

Programming mode Week / Weekend (5/2) or 7 Individual Days (7d)

52d


Procedure :



  1. Press and hold the and  and  keys all together to enter Installer Mode and the installation settings.




  1. The first setting is Temperature Display Resolution selection – ‘d01’ which will be displayed on the screen. Press  to enter the setting.




  1. The current setting will be displayed flashing on the screen. Use the and arrow keys to change the selection.


Press  to confirm your selection.





  1. To continue to the second setting press the  button and ‘d02’ will be displayed on the screen.        To enter the setting press the  button(alternatively wait for ten seconds and the thermostat will return to its Normal Mode and display the current temperature).




  1. The current setting will be displayed flashing on the screen. Use theand arrow keys to change the selection.


Press  to confirm your selection.




  1. To continue to the third setting press the  button and ‘d03’ will be displayed on the screen. To enter the setting press the  button, (alternatively wait for ten seconds and the thermostat will return to its Normal Mode and display the current temperature).




  1. The current setting will be displayed flashing on the screen. Use the and arrow keys to change the selection.


Press  to confirm your selection.




  1. To continue to the third setting press the  button and ‘d04’ will be displayed on the screen. To enter the setting press the  button, (alternatively wait for ten seconds and the thermostat will return to its Normal Mode and display the current temperature).





  1. The current setting will be displayed flashing on the screen. Use the and arrow keys to change the selection.


Press  to confirm your selection.






  1. Your thermostat will now return to its normal mode and display the current temperature.


                                                            ______________________


    • Related Articles

    • RT510RF - Frost Setpoint Temperature (Installer Mode)

      ​  RT510RF : Installer Mode – Frost Setpoint Temperature  (5.4.2) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...
    • RT510RF - Temperature Offset            (Installer Mode)

       RT510RF : Installer Mode – Temperature Offset  (5.12.1) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...
    • RT510RF - Temp Display Increments (Installer Mode)

      ​  RT510RF : Installer Mode – Temperature Display Increments (5.11.1) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. ...
    • RT510RF - Programming Mode Selection (Installer Mode)

       RT510RF : Installer Mode – Programming Mode Selection (5.13.1) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...
    • RT510RF Installer Mode - Programming Mode Selection

       RT510RF : Installer Mode – Programming Mode Selection (4.2.1) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...