RT510RF - What's in the Box

RT510RF - What's in the Box



 RT510RF : What’s in the Box  (1.1.1) . 




Thermostat :   


The programmable room thermostat RT510RF is both a programmer and a room thermostat. A programmer allows you to set ‘On’ and ‘Off’ time periods to suit your own lifestyle. A room thermostat works by sensing the air temperature, switching on the heating when the air temperature falls below the thermostat setting and switching it off once this set temperature has been reached.

The RT510RF room thermostat switches the heating system on and off as necessary by transmitting a signal via RF to the Receiver which in turn is connected to your system boiler.


Receiver : 


The RXRT510 receiver is the switching part of your heating system. Wired directly to your boiler, pump and control valves the receiver controls your heating.


Installation Guide :


An installation quick guide and full user manual are included.


Fixing Kit :


The RT510RF is supplied on a detachable backplate so that it may be mounted on a wall. A fixing screw kit is supplied for this purpose.


Thermostat Stand :


An optional desk stand is also provided for the RT510RF Thermostat.




                                                       _____________________________

    • Related Articles

    • RT510RF - Installation of the Receiver

       RT510RF : Installation of the RXRT510 Receiver  (1.3.1) . Note :  This accessory must be fitted by a competent person, and installation must comply with the guidance provided in the current IEE Wiring Regulations and current Building Regulations. ...

    • RT510+ Series : Manuals

    • RT510RF Technical Information Page

       RT510RF : Technical Information Page  (6.1.1) . Thermostat : Receiver :                RF Receiver Wiring:                                                        __________________________

    • RT510RF - Operating Keys & Buttons

       RT510RF : Operating Keys and Buttons  (1.7.1) . Description : There are few user controls for the RT510RF, making this thermostat easy to operate. These controls are shown below, along with a description of each of their functions. The temperature ...

    • RT510RF - Frost Setpoint Temperature (Installer Mode)

      ​  RT510RF : Installer Mode – Frost Setpoint Temperature  (5.4.2) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...