RT510TX – My thermostat has stopped working
Q: My SALUS RT510TX thermostat has stopped working altogether – what can I do to get it working?
Remove the batteries and leave them out for 30 minutes. After this time, replace them with new, fresh alkaline batteries and retest.
Related Articles
RT510TX – Heating not working although the flame is showing (re-pairing)
Q: The heating is not working even though the flame is showing. The thermostat and receiver will need re-pairing: Ensure the receiver switches are set to Auto and On. Turn OFF the boiler at the mains switch on the wall for 30 seconds. Turn the boiler ...
RT510RF - Thermostat Setup - Dip Switches
RT510RF : Thermostat Setup – Dip Switch Settings (1.4.1) . Thermostat Dip Switches : On the back of the thermostat there are two small dip switches. One is for selecting SPAN or ITLC and the other allows you to choose between Radiators or Electric ...
RT510 Series Thermostat Videos
Pairing. Follow this procedure if you have a red flashing light on your Receiver. Receiver Controls ( Auto/Manual Mode, LED's Explained) Common Issues and Frequently Asked Questions General Use : Turning your Heating On Blank Screen - No Display ...
RT510+ Series : Manuals
RT510RF - Operating Keys & Buttons
RT510RF : Operating Keys and Buttons (1.7.1) . Description : There are few user controls for the RT510RF, making this thermostat easy to operate. These controls are shown below, along with a description of each of their functions. The temperature ...