RX10RF - FAQs

RX10RF - FAQs

Question: What thermostats are compatible with RX10RF?

Answer: 
The RX10RF is a receiver from the smart home range meaning it is not a simple thermostat to receiver unit. The RX10RF works only in a coordinator like CO10RF (offline) or a gateway UG600/UG800 (offline or online) system setup.

The RX10RF can be triggered by any of the Salus smart home rated thermostats a KL08RF wiring centre and TRV10RFM when connected to the same coordinator or gateway.





    • Related Articles

    • HTRP-RF(50) - Manuals and Spec Sheets

      Simple to use and with a clear easy to read LCD display, the HTRP-RF(50) is perfect for users who want complete control over their underfloor heating system. With silent switching and TPI (Time Proportional & Integral) calibration, accuracy and ...

    • HTRS-RF(30) - Manuals and Spec Sheets

      Simple to use and with a clear easy to read LCD display, the HTRS-RF(30) is perfect for users who want to precisely control individual room temperature. With silent switching and TPI (Time Proportional & Integral) calibration, accuracy and efficiency ...

    • T30NC230 - FAQs

      Question: The T30NC230 is not working. Answer: Troubleshooting the T30N230 should only be done by a competent person / installer. If the actuator is not opening, carry out electrical checks using a multimeter. Please note that the T30NC230 is a slow ...

    • TS600 - FAQs

      Question: How do I update firmware on the TS600? Answer: The universal gateway manages Firmware updates automatically and only applies them when needed. Question: How do I reset and re-pair TS600 with Salus Gateway? Answer: IF the device has ...

    • SR600 - FAQs

      Question: Can SR600 be used outside? Answer: SR600 relays are not suitable for environments where extreme moisture or humidity can occur. The device has an IP rating of IP30