RX10RF INTENDED USE

RX10RF INTENDED USE


Overview 


The image illustrates the intended use of the RX10RF system for controlling heating in a building, differentiating between underfloor heating (UFH) and radiator circuits. The system uses wireless communication to manage different heating zones based on thermostat requests. 

Additional Notes 


The system uses a wireless device control module when a cable cannot be used between the KLO8RF wiring center and the boiler. 

The diagram includes manual adjustments or settings for the heating zones on the KL08RF unit. 

 

 

  

Date 

Drawn 

Issue 

No. 

Title 

Checked 

Date 

20/01/2026 

Jim McHale 

1.1 

20251028 

RX10RF INTENDED USE 

 

 ​

 


Components 

Boiler: 

The heat source for the entire system

    • Textbox 1, Textbox


RX10RF Boiler Receiver: 
Receives signals from other RX10RF devices and activates the boiler. There are two RX10RF receivers.

  •  


IN RX1 BOILER RECEIVER 


 


KLO8RF Wiring Centre: 
A central control unit that manages zone activation and communicates with the boiler.



 


UGE600: An additional, wireless device control module to be used if a cable can't be used between the KL08RF wiring



    •  

 

RX10RF Room Extension Receiver: Receives signals from radiator thermostats.


              IN RX2 ROOM EXTENTION RECEIVER

  

 

 Thermostats (SQ610RF): Located in different zones (both UFH and radiator), these devices send signals to the control units when heat is required. 

Group 7, Grouped objectGroup 17, Grouped object 



Zone Valves: Control the flow of hot water to either the UFH or radiator circuits.

      •              

   

230Vac Pump: Circulates water through the underfloor heating loops.

230Vac PUMP FOR UFH



OVERALL SYSTEM LAYOUT




The UFH Wiring Centre layout





The Radiator Circuit layout






System Operation

The system differentiates between underfloor heating and radiator zones:




2. Radiator Zone Activation: