Keys / Buttons needed :         Cog/Settings       Tick/Confirm     Arrows       

Description : The iT500 thermostat schedules can be programmed remotely on the device in the event of the User having no internet access. 

Types of Schedules :   

The iT500 system has three different methods in which you can program schedules. 

All :                         This option is displayed on the thermostat as ‘1234567’. This option allows you to define a set of times and temperatures for a program schedule that will run all week. It will perform the same schedule routine every day of the week.

5/2 :                       This option is displayed on the thermostat as ‘12345’ initially and then once this schedule has been set, pressing the Cog button again will lead you to set the schedule for the weekend. ‘67’. This option defines two sets of program schedules. One set of times and temperatures will be used for the week period (Monday to Friday) and another separate set that will be used only at the weekend, hence 5 / 2. 

Individual :             This option is displayed on the thermostat as ‘1’ for Monday. Pressing the cog key moves you through the days to 2 (Tuesday) , 3 (Wednesday) etc. This option lets you define a program schedule for each day of the week individually, so you can have your heating come on at different times and at different temperatures every day.

1. Press and Hold the Cog key   for 5 seconds.         Your Heating Zones and your current program format will now flash.

 

2. Press the Tick key  .  House 1 (Zone 1) will now flash. If you wish to set the schedule for Zone 2 (depending on your system configuration) or Hot Water, press the cog key   again.                        Press tick   to confirm the Zone you wish to program.

Note:  If your system is only configured for one central heating zone, then that zone will be selected automatically.

 

3. The current program method will now flash.           Press the Cog key    to toggle between the different program schedule options. (All, 5/2 & Individual)  Press tick   to confirm program schedule selection. (The number in the white box under the time shows the program number you are currently setting.)

4. The ‘hour’ will now flash. Use the up and down arrows     to select the ‘hour’ for the first setpoint.   Press the tick key    to confirm.
   

 

5. The ‘minutes’ will now flash.                                     Use the up and down arrows   to select the ‘minutes’ (these are in increments of 10 minutes).        Press the tick key   to confirm.

 

6. The temperature will now flash. 

Use the up and down arrows   to set the temperature you wish to have for that setpoint.          Press the tick key   to confirm. 

7. The programming for Program 1 is now complete. The thermostat now switches to Program 2 of 6 as indicated on the screen. 

Now repeat steps 4 to 6 for the remaining setpoints in the program schedule type you have chosen.