VS20WRF - FAQs

VS20WRF - FAQs

Question: Whenever we try to decrease the temperature on the VS20WRF thermostat, it goes back up?
Answer: A digital thermostat from Salus Controls will show the current room temperature. When you make an adjustment and turn it up or down, the display will show you the new desired set point for a few seconds, then revert back to showing the current room temperature.
Tapping the up or down arrow just once will show what the setpoint on the thermostat is.

    • Related Articles

    • TS600 - FAQs

      Question: How do I update firmware on the TS600? Answer: The universal gateway manages Firmware updates automatically and only applies them when needed. Question: How do I reset and re-pair TS600 with Salus Gateway? Answer: IF the device has ...

    • T30NC230 - FAQs

      Question: The T30NC230 is not working. Answer: Troubleshooting the T30N230 should only be done by a competent person / installer. If the actuator is not opening, carry out electrical checks using a multimeter. Please note that the T30NC230 is a slow ...

    • RX10RF - FAQs

      Question: What thermostats are compatible with RX10RF? Answer: The RX10RF is a receiver from the smart home range meaning it is not a simple thermostat to receiver unit. The RX10RF works only in a coordinator like CO10RF (offline) or a gateway ...

    • SR600 - FAQs

      Question: Can SR600 be used outside? Answer: SR600 relays are not suitable for environments where extreme moisture or humidity can occur. The device has an IP rating of IP30 Question: The app doesn't turn my hot water on in line with the schedule, ...

    • SPE600 - FAQs

      Question: The plug doesn't turn on when I try to press the side button of the SPE600? Answer: Remove the SPE600 from the mains for a minute, then plug it back in. Wait 30 seconds then re-test the switch. If it still won't work, factory reset the ...