WLS600 - Water Leak Sensor

            

   
   

The new SALUS WLS600 Water Leak Sensor is designed to detect the presence of water. This can be done using the main sensor directly or via the remote sensing lead included. The unique design allows vertical or horizontal fitting.

• Related Articles

• PS600 - Smart Pipe Sensor

           The PS600 temperature sensor measures and reports the measured temperature periodically. The measured temperatures can be used in a variety of ways depending on the system configuration: by association with cooling / heating systems, ...

• SB600 - Smart Button

  The Smart Button is used to trigger the “One touch” and “My Status” rules that you have created for your SALUS Smart Home system. Normally “One touch” and “My Status” rules are triggered via the SALUS Smart Home app, however the Smart Button provides ...

• DI600 - Smart Dimmer Switch

  DI600 is a Zigbee-controlled dimmer relay, that can be used for controlling different light sources. This product must be used with the Universal Gateway UG600/UGE600 and Salus Smart Home App

• CSB600 - Covered Smart Button

  The Protective Smart Button can be used during a panic situation in order to trigger the “One touch” and “My Status” rules that you have created for your Salus Smart Home system . Normally “One touch” and “My Status rules are triggered via the Salus ...

• RX10RF - Videos and Manuals

                   The SALUS RX10RF receiver is used as part of the SALUS Smart Home system as an external boiler switch or individual zone receiver. The receiver can be used with the KL08RF wiring centre for underfloor systems or the TRV10RFM for ...