RT310RF - Frost Protection

RT310RF - Frost Protection



 RT310RF : Frost Protection  (4.4.1) .

          

                                              Buttons Used  



Description :


Frost Protection Mode ensures that the temperature of your home does not fall below a certain point to prevent your pipes from freezing. The Frost Setpoint Temperature can be set using Installer Mode, please see the Frost Setpoint Article RT310RF - Frost Setpoint (salus-tech.com)

                                                                   


To Activate : 



Simply press the Frost Button to activate Frost Protection Mode.

The Frost Protection Symbol will appear in the display to show it is active.

                                          


To De-Activate : 



Simply press the Frost Button to de-activate Frost Protection Mode .

The Frost Protection Symbol will disappear from the display.



To Review the Frost Setpoint Temperature : 



The Frost Setpoint Temperature can be reviewed by pressing the up or down arrow key whilst in Frost Mode, but can only be changed in Installer Mode.

Please refer to RT310RF - Frost Setpoint (salus-tech.com) for changing the Frost Setpoint.




                                                       ___________________________

    • Related Articles

    • RT310RF - Unable to change Temperature and 5'C on the screen - Frost Protection

      ​  RT310RF : 5’C on screen and unable to change temperature  (6.2.3) .                                                          Buttons Used   Description : If your display is showing 5’C (or a figure between 5’C and 17’C) and you are unable to ...

    • RT310RF - Frost Setpoint

      ​  RT310RF : Installer Mode – Frost Setpoint (4.4.2) . Description :      Installer Mode takes you into the device installation settings which on the RT310 Series allows you to change the settings in the table below. Setting No. Function Parameter ...

    • RT310RF - Testing the RF Transmissions

      RT310RF : Testing the RF Transmissions  (1.5.2) . Description :                        It is important to site both the receiver and thermostat in locations where the RF (Radio Frequency) signal cannot be interrupted. The receiving range between the ...

    • RT310RF & RT310TX - Testing the RF Transmissions

      RT310RF : Testing the RF Transmissions  (1.5.2) . Description :                        It is important to site both the receiver and thermostat in locations where the RF (Radio Frequency) signal cannot be interrupted. The receiving range between the ...

    • RT310RF - Temperature Display Increments

      ​  RT310RF : Installer Mode – Temperature Display Increments (4.8.1) . Description :      Installer Mode takes you into the device installation settings which on the RT310 Series allows you to change the settings in the table below. Setting No. ...