RT510RF - Unable to change Temperature &  5 degrees on the screen (Frost Protection)

RT510RF - Unable to change Temperature &  5 degrees on the screen (Frost Protection)



 RT510RF : Unable to change temperature and 5 ̊c on the screen (7.2.3) .

  

                                                  

                                                      Buttons Used  

  


Description :

If your display is showing 5’C (or a figure between 5’C and 17’C) and you are unable to increase or decrease the temperature, then this is because your Thermostat is currently in Frost Protection Mode. There will also be a Frost icon on the display confirming you are in Frost Protection Mode. Pressing the Frost button on the thermostat will exit Frost Protection Mode and allow you to change the temperature. 


For more information about Frost Protection Mode please see below.


Frost Protection Mode ensures that the temperature of your home does not fall below a certain point to prevent your pipes from freezing. The Frost Setpoint Temperature can be set using Installer Mode, please see the Frost Setpoint Article RT510RF - Frost Setpoint Temperature (Installer Mode) (salus-tech.com)

                                                                   


To Activate : 


                           


Simply press the Frost Button to activate Frost Protection Mode.

The Frost Protection Symbol will appear in the display to show it is active.



To Review the Frost Setpoint Temperature : 

                         


The Frost Setpoint Temperature can be reviewed by pressing the Up or Down Arrow button whilst in Frost Mode, but can only be changed in Installer Mode.


Please refer to RT510RF - Frost Setpoint Temperature (Installer Mode) (salus-tech.com) for changing the Frost Setpoint.


                                          


To De-Activate : 

                        


Simply press the Frost Button to de-activate Frost Protection Mode .

The Frost Protection Symbol will disappear from the display.

        

                                                      ___________________________                                                                                                                                              



    • Related Articles

    • RT510RF - Frost Setpoint Temperature (Installer Mode)

      ​  RT510RF : Installer Mode – Frost Setpoint Temperature  (5.4.2) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...

    • RT510RF - Frost Protection

       RT510RF : Frost Protection  (5.4.1) .                                                                                                             Buttons Used      Description : Frost Protection Mode ensures that the temperature of your home does ...

    • RT510RF - Screen Icons and Symbols

      RT510RF : Screen Icons and Symbols  (1.7.2) .                                                                     _______________________

    • RT510RF - Temperature Offset            (Installer Mode)

       RT510RF : Installer Mode – Temperature Offset  (5.12.1) . Description :      Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function ...

    • RT510RF - Installer Mode

       RT510RF : Installer Mode  (1.4.2) . Description : Installer Mode takes you into the device installation settings which on the RT510 Series allows you to change the settings in the table below. Setting No. Function Parameter Description Default Value ...